Troubleshooting Guide - Braun CareStyle Compact Manual De Instrucciones

• We are promptly informed of the defect.
• The product is used and maintained in
accordance with the User Instructions.
• The appliance has not been altered in any way
or subjected to misuse or repair by a person
other than an authorised service agent for Braun
Household.
• No rights are given under this guarantee to a
person acquiring the appliance second hand or
for commercial or communal use.

Troubleshooting guide

PROBLEM
The appliance does not pro-
duce any steam.
The anti-limescale indicator is
on and less or no steam comes
out of the iron when pressing
the steam button.
CAUSE
There is not enough water in the
water tank.
The steam button has not been
pressed.
A new anti-limescale fi lter car-
tridge has just been installed.
The anti-limescale fi lter cartridge
is not placed properly.
The anti-limescale fi lter cartridge
needs to be replaced.
• Any repaired or replaced appliance will be
guaranteed on these terms for the unexpired
portion of the guarantee.
• The need for repair has not been caused by
insuffi cient aftercare or cleaning: or damage
caused by the chemical or electrochemical
eff ects of water.
REMEDY
Unplug the appliance; check if the
anti-limescale fi lter cartridge has
been well prepared and is placed
properly; fi ll water up to max. level;
close the lid of the water tank; plug
in and wait until the temperature
control LED is permanently on;
press the steam button until steam
comes out of the soleplate.
In case above procedure does
not solve the problem take the
following steps: press RESET +
steam buttons together until steam
comes out. Once steam comes out,
release the buttons.
Replace the anti-limescale fi lter
cartridge and press the reset button
for 5 seconds until the LED turns
off .
You can also use demineralised wa-
ter. In that case, you need to leave
the anti-limescale fi lter cartridge
in the compartment and press the
reset button for 5 seconds each
time the the antilimescale indicator
turns on.
15