Technical Date - NORAUTO 2221275 Manual De Instrucciones

General
Car parking sensor consists of ultrasonic sensors, digital control box, LED/LCD display. This system
detects the distance between the car and back obstruction with ultrasonic sensors installed on the
rear bumper of car. The obstruction image will be shown via the camera if video parking sensor. With
the change of alarm sound, detect the safe area correctly.
It is the best choice for the safe of your car.
Connection diagram of camera type parking sensor system
Note: First connect plug,then plug in power, if not in accordance with this order, the damage caused
by the Division is not responsible.

Technical Date

1. Rate Voltage: 12V
2. Operation Voltage range: 9-16V
3. Rated Current: 20-200mA
4. Detecting distance: 0.3-2.5m
5. Ultrasonic Frequency: 40KHz
6. Working temperature: -20°C ~ +70°C
7. Alarm type: BiBi warning sound.
29
Back
Back camera
Monitor
The white wire connect
to ACC 12V
The red wire connect to
the reversing lamp
The green wire connect
to the brake cable
Earth wire (Black)
EF G HABCD
RCA (Yellow)
Monitor