Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Clock/Hazard housing • E) (3) Panel clips • F) (6) #4 x 3/8" Phillips truss head screws
• G) (4) #8 x 3/8" Phillips pan head screws
A
B
Metra. The World's Best Kits.
®
Toyota Tacoma
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• 99-8235B = Black
• 99-8235CHG = Charcoal High Gloss
C
D
MetraOnline.com
2012-2015
E
F
G
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-8235
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. PATENT # D755,776
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 3/19/19 INST99-8235

Publicidad

loading

Resumen de contenidos para Metra 99-8235

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/19/19 INST99-8235...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY TEXT PWR VOL 1. Unclip, unplug and remove the climate 4. Remove (8) screws securing the radio control panel. (Figure A) brackets to the radio, then remove the SCAN brackets. (Figure D) 2. Remove (4) 10mm screws securing the radio assembly.
  • Página 3: Kit Preparation

    Note: (3) panel clips have been radio for proper operation. Insert Clock/Hazard switch assembly from provided, only if the factory clips are rear of 99-8235 radio housing trim panel 4. Slide the radio into the dash, then missing or damaged. (Figure A) secure it using the factory screws.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/19/19 INST99-8235...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/19/19 INST99-8235...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO TEXT PWR VOL 1. Soltar, desenchufar y quitar el panel de 4. Quite los (8) tornillos que sujetan los control de clima. (Figura A) soportes de radio a la radio, luego retire SCAN los soportes. (Figura D) 2.
  • Página 7: Preparación Del Kit

    (Figura A) y el conector de la antena en el tablero. (Figura A) Metra recomienda usar el adaptador 3. Fije los (3) clips del panel de fábrica al de acoplamiento adecuado de Metra panel de panel de la moldura de la radio.
  • Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y ®...