Levolor Roman Shades Instalación página 21

OUTSIDE MOUNT (OM)
STEP 7: INSTALLING THE SHADE–MOUNTING THE HEADRAIL
CAUTION: Be sure no cables are pinched by the
!
brackets or headrail during installation; damage
or overheating of components could result.
• Fit the front channel on top of the headrail onto the front
lip of installation brackets.
• Push the headrail up and back until it snaps into place.
• Check to ensure the headrail is securely in the brackets.
— Check that the bottom of the headrail is snapped into
the base of each bracket.
— Check that the front lip of each bracket is in the front
channel of the headrail.
— If any brackets are not installed correctly,
release the shade and reinstall. See
"Removing the Shade (If Necessary)"
on page 23.
Spring tab
Spring Tab
Spring tab
Good
Battery-Powered Motorized Operating System
INSTALLATION
Front lip
Front Lip
Headrail
Headrail
The front of the bracket
fits under the groove.
Bracket
Front lip
Headrail
Headrail
Snap in
Place
Bad
21