Please read and comply with
these original instructions prior
to the initial operation of your appliance and
store them for later use or subsequent own-
ers.
In case of transport damage inform ven-
–
dor immediately
Contents
Environmental protection . . . . . EN . . .1
Proper use . . . . . . . . . . . . . . . . EN . . .1
Function . . . . . . . . . . . . . . . . . . EN . . .1
Device elements. . . . . . . . . . . . EN . . .1
Operating modes . . . . . . . . . . . EN . . .2
Operation . . . . . . . . . . . . . . . . . EN . . .2
Warranty. . . . . . . . . . . . . . . . . . EN . . .4
Accessories and Spare Parts. . EN . . .4
Environmental protection
The packaging material can be
recycled. Please do not throw
the packaging material into
household waste; please send it
for recycling.
Old appliances contain valuable
materials that can be recycled;
these should be sent for recy-
cling. Batteries, oil, and similar
substances must not enter the
environment. Please dispose of
your old appliances using ap-
propriate collection systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Proper use
This remote control cabinet is intended for
the connection and operation of a vacuum
cleaner of up to max. 7.5 kW in connection
with 4 external remote controls.
The vacuum cleaner is controlled in ac-
–
cordance with the set parameters of the
PLC control in the remote control cabi-
net via max. 4 external remote controls.
To enable special applications, the re-
mote controls can also be combined
with valves or slides.
A soft start for the reduction of the start-
–
ing current can optionally be installed in
the remote control cabinet.
Device elements
Remote control cabinet
Part no. 4.812-236.0
7
1 PLC control
2 Inspection window
3 Indicator lamp of the remote control
cabinet
4 Selector switch for power outlet
5 Power outlet 230V
6 Power outlet CEE, 16A, 400V
7 Power outlet CEE, 32A, 400V
– 1
EN
Function
-AS0
-AS10
-A1
-Q1
-Q2
-H1
-S1
-S1
-X4
-X3
-X2
1
2
3
4
5
6
7