Kärcher 4.812-236.0 Manual De Instrucciones página 9

B029 With pushbutton operation of the
remote control: Operating time of
the vacuum cleaner on station 3
(specification in seconds)
B030 With pushbutton operation of the
remote control: Operating time of
the vacuum cleaner on station 4
(specification in seconds)
B033 Maximum operating time of the
vacuum cleaner (specification in
seconds)
B049 Operating mode of the remote
control 1: 0=pushbutton,
1=switch
B050 Operating mode of the remote
control 2: 0=pushbutton,
1=switch
B051 Operating mode of the remote
control 3: 0=pushbutton,
1=switch
B052 Operating mode of the remote
control 4: 0=pushbutton,
1=switch
B065 Reset of the shift counter
B129 Station 1: 0=valve, 1=indicator
lamp
B131 Station 2: 0=valve, 1=indicator
lamp
B133 Station 3: 0=valve, 1=indicator
lamp
B135 Station 4: 0=valve, 1=indicator
lamp
B137 0=no soft start installed, 1=soft
start installed
B143 Stopping time of the vacuum
cleaner (specification in seconds)
Menu of the PLC control
LCD display
Note: When operating any key on the front
side, the backlight of the LCD display is ac-
tivated for a period of 30 seconds.
Note: With the keys on the front side of the
PLC control the parameters can be config-
ured and programmed.
Z1 Z2
Start menu
total:
–
Operating hour counter
actual:
–
Shift counter (resettable)
Shift button
–
If the shift button is pushed, it enables
the indication of a context-sensitive
menu above the Z-buttons (Ins., Del.;
Param, etc.).
Button Menu/Ok
–
This button is used for any kind of con-
firmation: Menu, submenu, programme,
parameter, etc.
Navigation keys
–
◄/▼/▲/► (Z1-Z4)
– 3
EN
Z3 Z4 Shift
Menu/Ok
9