Auto Power Off - yellow jacket 52030F Instrucciones De Operación

3. Press the up/down button to select
4. Press the SET button to enter the
5. Press the up/down button to increase
6. Press the SET button to save the settings.
7. Press the back button to exit the
Substance Thermal Emissivity
Asphalt 0.90 to 0.98
Concrete 0.94
Cement 0.96
Sand 0.90
Earth 0.92 to 0.96
Water 0.92 to 0.96
Ice 0.96 to 0.98
Snow 0.83
Glass 0.90 to 0.95
Ceramic 0.90 to 0.94
Marble 0.94
Plaster 0.80 to 0.90
Mortar 0.89 to 0.91
Brick 0.93 to 0.96
Emissivity submenu.
emissivity or temperature compensation.
parameter adjustment state.
or decrease the value.
current menu.
Substance Thermal Emissivity
Cloth (black) 0.98
Human skin 0.98
Lather 0.75 to 0.80
Charcoal (powder) 0.96
Lacquer 0.80 to 0.95
Lacquer (matt) 0.97
Rubber (black) 0.94
Plastic 0.85 to 0.95
Timber 0.90
Paper 0.70 to 0.94
Chromium oxides 0.81
Copper oxides 0.78
Iron oxides 0.78 to 0.82
Textiles 0.90

AUTO POWER OFF

The 52030F thermal imager will turn off automatically after a preset time.
To set the auto power off time period:
1. Press the up/down button to select the
2. Press the SET button to enter the Auto
3. Press the up/down button to select the
4. Press the SET button to confirm.
5. Press the back button to exit the
LCD DISPLAY BRIGHTNESS
TO SET DISPLAY BRIGHTNESS
1. Press the up/down button to select the
2. Press the SET button to enter the
3. Press the up/down button to select the
4. Press the SET button to confirm.
5. Press the back button to exit the
Auto Power Off option in the settings menu.
Power Off submenu.
desired option from 5 Min, 10 Min, 30 Min,
and Off.
current menu.
Brightness option in the Settings menu.
Brightness submenu.
desired option. There are three choices:
Low, Middle, and High.
current menu.