Mounting The Bpl26L; Operating The Bpl26L - Federal Signal BPL26L Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions
Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards. If any
parts are missing, please call Federal Signal Customer Support
at 708-534-4756 or 877-289-3246.

Mounting the BPL26L

The Model BPL26L is designed for portable use. It comes with
a magnetic mounting base.
The holding power of the magnetic mount is dependent
NOTE:
upon surface finish, surface flatness, and thickness of the steel
mounting surface. Therefore, to establish a good magnetic
coupling:
• Ensure that mounting surface is flat.
• Keep the mounting surface and magnet clean, dry, and free
of foreign particles that prevent good surface contact.

Operating the BPL26L

LIGHT HAZARD: To be an effective warning device, an
emergency warning system produces bright light that can be
hazardous to your eyesight when viewed at close range. Do not
stare directly into the LED at a close range or permanent damage
to your eyesight may occur.
Press the black rubber switch cover on the side of the battery
housing until you hear a click. The light will begin to flash.
Repeating the above procedure shuts the light off.
Battery Powered Warning LED
5