IKEA TVÄTTAD Manual De Instrucciones página 16

ENGLISH
Spin and addi‐
tional options
touch button
10
Temperature
11 touch button
When you set a programme, the appliance automatically sets the
maximum spin speed allowed, except in Denim programme.
By means of this button, you can change the default spin speed
or set one of the additional spin options:
• Rinse Hold . The related indicator comes on.
The final spin is not performed. The water of the last rinse is
not drained out to prevent the fabrics from creasing. The
washing programme ends with water in the drum.
The door stays locked and the drum turns regularly to reduce
creasing. You must drain the water to unlock the door. Refer
to 'Draining water out after end of cycle' in the 'Daily use'
chapter.
• No Spin . The related indicator comes on.
Set this option to deactivate all spin phases. The appliance
performs only the draining phase of the selected washing
programme. Set this option for very delicate fabrics. The rinse
phase uses more water for some washing programmes
• Quiet Cycle . The related indicator comes on.
The intermediate and the final spinning phases are sup‐
pressed and the programme ends with water in the drum.
The door stays locked. The drum turns regularly to reduce
creasing. You must drain the water to unlock the door. Refer
to 'Draining water out after end of cycle' in the 'Daily use'
chapter.
As the programme is very quiet, it is suitable for use at night
time when cheaper electricity tariffs are available. In some
programmes the rinses are performed with more water.
The appliance empties the water out automatically af‐
ter approximately 18 hours.
When you select a washing programme, the appliance automati‐
cally proposes a default temperature. With this option you can
change the temperature.
The indicator of the set temperature comes on.
The indicator = cold water.
16