IKEA TVÄTTAD Manual De Instrucciones página 24

ENGLISH
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause
to start the new countdown.
The AutoAdjust System load
detection
After touching the Start/Pause
1. The AutoAdjust System starts estimating
the weight of the load to calculate the
real programme duration. During this
phase the indicator
the time digits plays a simple animation.
2. After about 15-20 minutes the indicator
disappears and new cycle duration
is displayed.
The appliance automatically adjusts the
programme duration to the load to
achieve perfect washing results in the
minimum possible time.
Pausing a programme and changing
options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
The washing programme continues.
button to
button
button again
button:
placed below
button.
button again.
Cancelling a running programme
1. Press the button On/Off
programme and to deactivate the
appliance.
2. Press the button On/Off
activate the appliance.
If the AutoAdjust System has
completed and the water filling
has already started, the new
programme starts without
repeating the AutoAdjust
System. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of cancelling:
1. Rotate the programme knob to the "Reset"
position .
2. Wait for 1 second. The display shows
Now, you can set a new washing
programme.
Opening the door
Warning! If the temperature and
level of the water in the drum are
too high and/or the drum is still
rotating you should not open the
door.
Adding garments. It is
recommended to add garments
until the
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator
1. Touch the Start/Pause
In the display the related door lock indicator
goes off.
2. Open the appliance door. If necessary,
add or remove the garments. Close the
door and touch the Start/Pause
button.
The programme or the delay start continues.
The door can be opened when the
programme is completed, or set the
to cancel the
again to
is on.
.
button.
24
.