External Cleaning; Maintenance Wash; Cleaning The Drum - IKEA TVÄTTAD Manual De Instrucciones

Ocultar thumbs Ver también para TVÄTTAD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 195
ENGLISH
Clean detergent dis‐
penser
Clean drain pump
filter
Clean the inlet hose
and the valve filter
The following paragraphs explain how you
should clean each part.
Removing foreign objects
Make sure that pockets are empty
and all loose elements are tied up
before running your cycle. Refer
to 'The laundry load' in 'Hints and
tips'.
Remove any foreign objects (such as metal
clip, buttons, coins, etc) that you may find in
the door seal, the filters and the drum. Refer
to 'Door seal with double lip trap', 'Cleaning
the drum', 'Cleaning the drain pump' and
'Cleaning the inlet hose and the valve filter'
paragraphs. If necessary, please contact the
Authorised Service Centre.

External cleaning

Clean the appliance with mild soap and
warm water only. Fully dry all the surfaces.
Do not use a scouring pads or any scratching
material.
Caution! Do not use alcohol,
solvents or chemical products.
Caution! Do not clean the metal
surfaces with chlorine-based
detergent.
Descaling
If the water hardness in your area
is high or moderate, we
recommend that you use a water
descaling product for washing
machines.
Every two months
Twice a year
Twice a year
Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to run
a cycle with an empty drum and a descaling
product occasionally.
Always follow the instructions
that you find on the packaging of
the product.

Maintenance wash

The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues, bacterial
growth inside the drum and the tub. This
could generate bad odours and mildew. To
eliminate these deposits and clean the inner
part of the appliance, run a maintenance
wash regularly (at least once a month).
Refer to "Cleaning the drum"
paragraph.
Door seal
Regularly examine the seal of the door and
remove all objects from the inner part.

Cleaning the drum

Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due to
rusting foreign body in the washing or tap
water containing iron
Clean the drum with special products for
stainless steel.
28

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido