Set Up Software (First Time Use); Windows Xp; Windows Vista; Disable Sleep Mode - Oregon Scientific RMS600 Manual De Usuario

To select clock display mode:
Press MODE to toggle between clock with seconds, clock
with weekday.

SET UP SOFTWARE (FIRST TIME USE)

The main unit is capable of connecting to a PC computer
using the USB connection. Weather data of temperature
and humidity readings can be uploaded to the computer by
connecting the main unit to the computer.
PC system requirements
The minimum system requirements for use of the software is:
• Operating system: Microsoft Windows XP SP2 or
Vista
• Processor: Pentium III or 4 (recommended)
• RAM: Min. 256 MB or 512 MB (recommended)
• Hard disk free space: Min. 256 MB or 512 MB
(recommended)
• Screen Display Area:1024 x 768 pixels
(recommended)

WINDOWS XP

To install software:
1. Run CD software provided.
2. Setup wizard dialogue box will appear and guide you
through the installation process.
3. After successful installation, double click on
desktop shortcut.
4. Click DISPLAY in Oregon Weather Station dialogue
box.
P/N: 086L005521-019 REV1
8/92

WINDOWS VISTA

To Disable User Access Control (UAC):
1. From the desktop, My Computer > Control Panel >
User Accounts and Family Safety > Change your
Windows password > Turn User Account Control On
or Off.
2. Deselect the UAC option by un-ticking.
3. Follow steps 1-4 from above section.

DISABLE SLEEP MODE

To allow for continuous update of data, ensure Sleep Mode
on computer is disabled.
TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS XP )
1. Right click on Desktop.
2. Choose "Properties".
3. Click on "Screen Saver" Tab in the Display Properties
window.
4. Click on "Power" located at the bottom half of window.
5. A new window "Power Options Properties" will open.
6. Under "System standby" option, choose "Never" in drop
down menu.
7. Click "Apply" and then click "OK".
8. Previous window will return. Click "OK" to confirm and exit.
6