What appears to be a malfunction may not always be serious. First make
sure...
Symptoms
No sound.
Is the transmitter's power OFF?
Is the headphones' power OFF?
Is the battery in the headphones
exhausted?
Is the volume of the headphones set
to the minimum level?
Is the volume of the connected AV
equipment set to the minimum level?
No sound from
Is the transmitter connected to
the R-channel.
equipment with monaural audio
output?
Distorted sound.
Is the battery in the headphones
exhausted?
Is the volume of the connected AV
equipment set too high?
Is the battery in the headphones
Noisy sound.
exhausted?
Are the frequency modulation signals
being received correctly?
Is there a possibility of interference? Switch the transmitter channel, wear
Is the volume of the connected AV
equipment set too low?
Are the headphones too far away
from the transmitter?
Battery charging
Has the rechargeable battery
is impossible.
expired?
TROUBLESHOOTING
Cause
Remedy
Check the connection of the
transmitter.
Turn the power on the connected AV
equipment ON and start playing.
Widen the headphones to wear it and
the power will turn on automatically
(the indicator lights).
Fully charge the headphones.
Adjust the volume of the head-
phones to the appropriate level.
Raise the volume level of the
connected AV equipment as high as
possible without causing distortion.
Connect them with an optional plug
adaptor. (Converts monaural audio
output to stereo audio output.)
Fully charge the headphones.
Adjust the volume level of the
connected AV equipment as high as
possible without causing distortion.
Fully charge the headphones.
Wear the headphones again to
switch the power back on, then tune
again.
the headphones again to switch the
power back on, then tune again.
Adjust the volume level of the
connected AV equipment as high as
possible without causing distortion.
Use them within the range the
frequency modulation signal can
reach. (Refer to page 11)
Replace it with a new battery. Refer
to page 13 or consult your dealer for
replacement.
19