Remote Control - THOMSON MIC500B Manual De Instrucciones

REMOTE CONTROL

1
2
F M
3
ST
4
5
P-EQ
6
CLOCK
7
8
9
10
11
ALB
12
13
EN 14
BLUETOOTH
MIC500B
26
25
USB AUX MP3 LINK
24
MODE A-B DIM
23
22
LOUDNESS S-BASS SLEEP
21
TIMER
PRESET
20
19
18
17
DISPLAY
PAIRING
16
VOL
15
MUTE
14
PROG
MICRO SYSTEM
®
Insertion (lithium battery)
Replace with button cell type battery.
The battery generally lasts for around one year.
Replace the battery if the remote does not work on the device when it is being used in normal
circumstances.
Button cell type batter (lithium battery)
• Unscrew the screw on the back of the remote.
• Pull the tab to take out the battery holder if the battery is being used for the first time, then
take out the battery compartment in the back of the remote.
• Insert one 3V micro lithium battery, type CR.2025. Be sure to make the polarity match.
• Close the battery compartment.
• Screw the screw back into the underside of the remote.
INFORMATION ABOUT BATTERIES
• The appliance must be equipped with the appropriate batteries in order to function
properly.
• Only recommended batteries should be used.
• Polarity must be respected when inserting batteries.
• The batteries should be inserted in such a way as to avoid any short circuit.
• Do not mix used and new batteries.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable (nickel-cadmium) batteries.
• Do not recharge or try to open the batteries. Do not throw the batteries in fire.
• Replace all batteries at the same time with new, identical batteries.
• Remove the batteries when unused for a long time.
• If the liquid contained in the batteries comes in contact with eyes or skin, wash the area
immediately and carefully with clear water and consult a doctor.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
ATTENTION: Danger of explosion if batteries are not inserted correctly.