Installation - Automatismos Pujol 600N Manual Del Usuario

STC
Nombre del Producto modelo

Installation

1 Read the instructions carefully.
2 Ensure the door structure is solid and suitable for automation.
3 Ensure the door's manual door motion is right and smooth.
4 The door must be perfectly balanced and be easily raised and lowered by hand.
5 A 230V socket and groundings should be mounted next to the operator.
Overall view, Fig.2
1 Rail
2 Beacon
3 Push-button
4 Photocell
5 Electronic assembly
6 Plug
7 Operator
Chain-puller assembly
To facilitate the installation, the rail comes with the chain and
puller properly attached. Should any modification be
necessary, attached the puller to the chain with two bolts
tightly screwed. Slide the puller through the rail, and grease
the chain and puller's notches using a lithium grease or similar.
Do not use lubrication oil
Sectional door, maximum height 2600mm
Swing door, maximum height 2600mm
37