STC
Nombre del Producto modelo
Standard application
This operator may be used for the automation of sectional or spring swing doors up to 2600mm high. Bear in mind the door's
weight when selecting the most suitable model to install (600N, 800N y 1000N)
The maximum rail course is 2500mm long.
Maximum course 2500
Manual disengagement
The operator is equipped with a manual disengaging mechanism consisting of a tow and knob that releases the door in case of power
supply failure or system breakdown (Fig. 8). Pull the tow-line to unlock the pull trolley and operate the door manually. To engage the
door again, simply let go of the tow-line, start the operator or move the door manually until the trolley is engaged. For installations
with no pedestrian door, it would be necessary to disengage the system manually from the outside (Fig. 9).
Information for the end user
Once the adjustments are completed, the installer should brief the end user on the system operation and all the hazards
associated with potential system's misuses.
The user must always avoid hazardous situations like staying in the door's operation range during its motion. Do not let
children play near the door and keep all remote controls out of their reach. All services, repairs or checks must be performed
by qualified and trained personnel, and should be registered on a document kept by the user.
Note: In case of malfunctioning, the user should call the authorized installer and must not attempt any repair task on the
system.
43