Blue Angel Pumps BTU30 Manual De Instrucciones De Operación Y Piezas

Description
The pedestal pump is designed for home
sump applications. The unit is equipped
with an 8-ft long, 3-prong grounding
type power cord. Motor is air cooled; it is
not designed to operate under water. A
float switch is provided for automatic
pump operation. This pump is not
suitable for aquatic life.
Safety Guidelines
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
General Safety
Information
1. Read these rules and
instructions carefully.
Failure to follow these
instructions could cause
serious bodily injury
and/or property
damage.
© 2007 Blue Angel™ Pumps
Operating Instruction and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
Pedestal
Sump Pump
motor to be exposed to water. Personal
injury and/or death could result.
Do not use to pump
flammable or explosive
fluids such as gasoline, fuel
oil, kerosene, etc. Do not
use in a flammable and/or explosive
atmosphere. Pump should only be used
to pump clear water. Personal injury
and/or death could result.
salt water, brine, laundry discharge or
any other application which may contain
caustic chemicals and/or foreign
materials. Pump damage could occur if
used in these applications and will void
warranty.
qualified electrician.
If the basement has water
or moisture on the floor, do
not walk on wet area until
all power is turned off. If the shutoff box
is in the basement, call an electrician.
Remove pump and either repair or
replace. Failure to follow this warning
could result in fatal electrical shock.
used. Call 1-888-636-6628 to order an
emergency backup system.
Assembly
Always disconnect the
power source before
attempting to install,
service, relocate or maintain
the pump. Never touch sump pump,
pump motor, water or discharge piping
Do not submerge when pump is connected to electrical
motor or allow power. Never handle a pump or pump
motor with wet hands or when standing
on wet or damp surface or in water. Fatal
electrical shock could occur.
1. Insert the float rod through hole in
This pump is not
designed to handle
All wiring must be
performed by a
Figure 1
2. Place rubber grommet on float rod
3. Using pliers to hold the float rod,
A battery backup
system should be
1
BTU30
the switch lever (See Figure 1).
in temporary position.
screw the float on as shown in
Figure 1.
360901-002 1/07