Publicidad
USE
Homologated as anchor device for inclined timber or concrete
surfaces (only with the additional KRAKEN fastening set), for 1
person equipped with PPE as per EN 361 and with the following fall
protection systems as per EN 363.
• Restraint and positioning systems (EN 358)
• Guided type fall arresters including a flexible anchor line (EN 353-2)
• Lanyards (EN 354) with energy absorbers (EN 355)
• Retractable fall arrest devices (EN 360)
To ensure safe use, follow the indications provided each time by the
PPE manufacturer.
REGULATIONS
The manufacturer declares that the following products LOOP-
LOOPXL and its component KRAKEN (see specific manual) comply
with standards EN 795:2012 type A Notified body, TÜV Süd
Product Service GmbH, Ridlerstr.65, 80339 München (test report no.:
713028458-1) and UNI 11578:2015 tipo A.
Rothoblaas LOOP - LOOPXL is an anchor device for inclined timber
or concrete surfaces (only with the additional KRAKEN fastening set)
with and without insulation. The device has been tested at 360° (as
illustrated below) on all related substrates.
FUNCTION
Rothoblaas LOOP - LOOPXL is an anchor device that is fastened to
a statically tested sub-base (e.g.: bearing structure of a roof) and is
used as anchor device for personal protective equipment.
MATERIAL
Rothoblaas LOOP - LOOPXL is made of 1.4404 – AISI 316 stainless steel
and EN-AW 6060 alloy aluminium.
SYMBOLS AND MARKINGS
The anchor device must bear the following information:
• Type: Rothoblaas LOOP - LOOPXL
• Number(s) of relating standard(s): EN 795/A:2012 and
UNI 11578/A:2015
• Maximum number of users: 1 person
• Name or logo of manufacturer/distributor: ROTHOBLAAS
• Serial number and year of manufacture:
XXXXYYYY (X=lot number – Y=year)
• Symbol indicating need to consult instructions for use:
DISTRIBUTION AND DEVELOPMENT
Rotho Blaas srl - Via dell' A dige 2/1 - 39040 Cortaccia (BZ)
www.rothoblaas.com
23
Publicidad
