Connecting To Bluetooth Devices - Alcatel POP4 PLUS Manual Del Usuario

To set preferred network mode
on the Quick settings bar to get to Settings.
1 Touch
2 Touch More > Mobile networks > Preferred network mode.
3 Select LTE/WCDMA/GSM as your preferred network mode.
6.1.2 Wi-Fi
You can connect to the Internet when your phone is within the range of a
wireless network. Wi-Fi can be used on your phone even without a SIM card
inserted.
To turn Wi-Fi on and connect to a wireless network
1 Touch on the Quick settings bar to get to Settings, then touch Wi-Fi.
2. Touch the switch to turn on/off Wi-Fi.
3. Turn on Wi-Fi: detailed information of all detected Wi-Fi networks is
displayed. in the Wi-Fi networks section.
4. Touch a Wi-Fi network to connect to it. If the network you selected is
secured, you'll need to enter a password or other credentials (contact
network carrier for details). When finished, touch CONNECT.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon will
appear on the status bar whenever the phone detects an available wireless
network within range. The following steps activate the notification function
when Wi-Fi is on:
1 Touch on the Quick settings bar to get to Settings.
and select Advanced.
2. Touch Wi-Fi, then touch
3. Touch the Network notification switch
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
on the Quick settings bar to get to Settings.
1 Touch
2 Touch Wi-Fi, then touch and select Add network.
3. Enter the name of the network and any required network information.
4. Touch SAVE.
to activate/deactivate this function.
50
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you no
longer wish to use.
1. Turn on Wi-Fi, if it's not already on.
2. In the Wi-Fi screen, long press the name of the saved network.
3. Select Forget network in the dialog that opens.
6.2

Connecting to Bluetooth devices

Bluetooth is a short-range wireless communication technology that you can
use to exchange data, or connect to other Bluetooth devices for various uses.
To exchange data, touch on the Quick settings bar to get to Settings, then
touch Bluetooth. Your device and other available ones will show on the screen.
To turn on Bluetooth
Touch to turn this function on or off.
To make your phone more recognisable, you can change your phone's name
which is visible to others.
1. Go to Settings > Bluetooth.
2. Touch and select Rename this device.
3. Enter a name, and touch RENAME to confirm.
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on and pair
your phone with the Bluetooth device with which you want to exchange data.
1. Go to Settings > Bluetooth.
2. Touch and select Refresh.
3. Touch a desired Bluetooth device in the list.
4. A dialog will pop up, touch PAIR to confirm.
5. If the pairing is successful, your phone connects to the device.
To disconnect/unpair from a Bluetooth device
1. Touch after the device name you want to unpair.
2. Touch FORGET to confirm.
You are recommended to use alcatel Bluetooth headsets, which have
(1)
been tested and proved compatible with your phone. You can go to
www.alcatelonetouch.us for more information about the Alcatel Bluetooth headset.
(1)
51