Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
When the 150
Wireless USB Adapter is connected to your computer, you can proceed with installing the
N
Conceptronic drivers & software.
A.
Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be shown
automatically. Click on "Run Autorun.exe" to start the autorun menu.
Note:
If the AutoPlay option is not shown, you can start the autorun menu by browsing to
"Computer" and double clicking on your optical drive.
B.
Select the option "Install Driver & Software" from the autorun menu. The installation wizard will
appear.
Note:
You might get a "User Account Control" warning message, which you will need to accept by
clicking on "Yes".
C.
Select the language you want to use for the installer and click on "OK" to proceed.
D.
Select "Install drivers and Conceptronic Wireless Network Config Utility" if you want to use the
Conceptronic software, or select "Install drivers only" if you want to use the standard Windows
Wireless Configuration utility. Click on "Next" to proceed.
E.
Click on "Install" to install the driver and software.
F.
A popup verifying that you have connected the hardware will be shown. Click on "OK" to proceed.
The drivers & software (if selected) will be installed on your computer.
Note:
During the installation, you might get a "Windows Security" warning message, which you
will need to accept by clicking "Install this driver software anyway".
G.
When the installation is finished, click on "Finish" to close the installation wizard.
H.
The Conceptronic Wireless Network Config Utility will be shown if you have selected to install the
drivers and the software.
Note:
It is recommended to restart your computer when the new hardware installation has been
completed.
You can now proceed to chapter 5 to connect to a wireless network.
12
4. Driver & software installation
Publicidad
Tabla de contenido
