Carel ir33+FMC Guía Rápida página 23

IMPORTANT
CAREL bases the development of its products on decades of experience
in HVAC, on the continuous investments in technological innovations
to products, procedures and strict quality processes with in-circuit
and functional testing on 100% of its products, and on the most
innovative production technology available on the market. CAREL and
its subsidiaries nonetheless cannot guarantee that all the aspects of
the product and the software included with the product respond to
the requirements of the final application, despite the product being
developed according to start-of-the-art techniques. The customer
(manufacturer, developer or installer of the final equipment) accepts
all liability and risk relating to the configuration of the product in order
to reach the expected results in relation to the specific final installation
and/or equipment. CAREL may, based on specific agreements, act as a
consultant for the positive commissioning of the final unit/application,
however in no case does it accept liability for the correct operation of
the final equipment/system.
The CAREL product is a state-of-the-art product, whose operation is
specified in the technical documentation supplied with the product or
can be downloaded, even prior to purchase, from the website www.
CAREL.com.
Each CAREL product, in relation to its advanced level of technology,
requires setup / configuration / programming / commissioning to be
able to operate in the best possible way for the specific application. The
failure to complete such operations, which are required/indicated in the
user manual, may cause the final product to malfunction; CAREL accepts
no liability in such cases.
Only qualified personnel may install or carry out technical service on
the product.
The customer must only use the product in the manner described in the
documentation relating to the product.
In addition to observing any further warnings described in this manual,
the following warnings must be heeded for all CAREL products:
• Prevent the electronic circuits from getting wet. Rain, humidity
and all types of liquids or condensate contain corrosive minerals
that may damage the electronic circuits. In any case, the product
should be used or stored in environments that comply with the
temperature and humidity limits specified in the manual.
• Do not install the device in particularly hot environments. Too
high temperatures may reduce the life of electronic devices,
damage them and deform or melt the plastic parts. In any case,
the product should be used or stored in environments that
comply with the temperature and humidity limits specified in
the manual.
• Do not attempt to open the device in any way other than
described in the manual.
• Do not drop, hit or shake the device, as the internal circuits and
mechanisms may be irreparably damaged.
• Do not use corrosive chemicals, solvents or aggressive
detergents to clean the device.
• Do not use the product for applications other than those
specified in the technical manual.
All of the above suggestions likewise apply to the controllers, serial
boards, programming keys or any other accessory in the CAREL product
portfolio.
CAREL adopts a policy of continual development. Consequently, CAREL
reserves the right to make changes and improvements to any product
described in this document without prior warning.
The technical specifications shown in the manual may be changed
without prior warning.
The liability of CAREL in relation to its products is specified in the
CAREL general contract conditions, available on the website www.
CAREL.com and/or by specific agreements with customers; specifically,
to the extent where allowed by applicable legislation, in no case will
CAREL, its employees or subsidiaries be liable for any lost earnings or
sales, losses of data and information, costs of replacement goods or
services, damage to things or people, downtime or any direct, indirect,
incidental, actual, punitive, exemplary, special or consequential damage
of any kind whatsoever, whether contractual, extra-contractual or due
to negligence, or any other liabilities deriving from the installation, use
or impossibility to use the product, even if CAREL or its subsidiaries are
warned of the possibility of such damage.
DISPOSAL
INFORMATION FOR USERS ON THE CORRECT HANDLING OF WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
In reference to European Union directive 2002/96/EC issued on 27
January 2003 and the related national legislation, please note that:
• WEEE cannot be disposed of as municipal waste and such waste
must be collected and disposed of separately;
• the public or private waste collection systems defined by local
legislation must be used. In addition, the equipment can be
returned to the distributor at the end of its working life when
buying new equipment;
• the equipment may contain hazardous substances: the improper
use or incorrect disposal of such may have negative effects on
human health and on the environment;
• the symbol (crossed-out wheeled bin) shown on the product or
on the packaging and on the instruction sheet indicates that the
equipment has been introduced onto the market after 13 August
2005 and that it must be disposed of separately;
• in the event of illegal disposal of electrical and electronic waste,
the penalties are specified by local waste disposal legislation.
Warranty on the materials: 2 years (from the date of production,
excluding consumables).
Approval: the quality and safety of CAREL INDUSTRIES Hqs products
are guaranteed by the ISO 9001 certified design and production system.
WARNING: separate as much as possible the probe and digital input
signal cables from the cables carrying inductive loads and power cables
to avoid possible electromagnetic disturbance. Never run power cables
(including the electrical panel wiring) and signal cables in the same
conduits.
READ CAREFULLY IN THE TEXT!
NO POWER
& SIGNAL
CABLES
TOGETHER