Wall Mounted - Cooper Lighting RSWPD Instrucciones De Instalación

RSWPD - Outdoor Sensor Extender/Multiplier

Wall Mounted

The housing can mount to a wall, mounting directly to a single
gang wall box (Figure 5) for compatible box configuration. See
the wiring diagrams below for both configurations:
• Wireless Extender (Figure 6) or Control Multiplier (Figure 7)
N ote: For outdoor applications on rough surfaces, a bead of
silcone may be applied behind the outer perimeter of the
housing base plate for increased water protection.
Figure 6
Wireless Extender (WE)
www.cooperlighting.com
Use Wire Nuts Suitable for the
Connecting Wire AWG
GND
HOT
NEUTRAL
GND - Green
12 AWG NEUTRAL - Line White
HOT - Line Black
4.1"
[103.5mm]
Recommended Single
Figure 5
Lanyard
Hook Tab
Housing
Mounting
Screws
WaveLinx Wireless
2.2"
[55.1mm]
No.6
Screws
STD 3.29"
[83.6mm]
Gang Junction Box
IB503092ML page 3
September 2020