Uline NewAir Flex H-7259 Manual Del Usuario página 5

ITEM NO. DIMENSIONS
S-19738 Medium Premium (1/2" inflated) 12" x 2,050' Perf 12"
S-19739 Medium Premium (1/2" inflated) 24" x 2,050' Perf 12"
S-19740 Large Premium (3/4" inflated) 12" x 1,250' Perf 12"
S-19741 Large Premium (3/4" inflated) 24" x 1,250' Perf 12"
S-19742 XL Premium (1" inflated) 12" x 1,167' Perf 12"
S-19743 XL Premium (1" inflated) 24" x 1,167' Perf 12"
NOTE: The factory default film setting is S-19740.
CHANGE THE FILM CODE SETTINGS
1. Press the up and down arrows and the reset button at
the same time to access the menu. (See Figure 12)
3. Use the arrow keys to move the cursor to Film Type.
Press the SELECT button on the left to select Film Type.
(See Figure 14)
INSTALL SET-UP
[Film 1
Winder Dia
SELECT
PAGE 5 OF 30
FILM CODE SETTINGS
FILM CODE SETTINGS
Figure 12
A124PT ]
37"
BACK
Figure 14
FILM CODE
Screen
A1S7LJ
A1T7HT
A124PT
Select
A124PT
A144RT
Start
A1T4RT
Key
2. Use the arrow buttons to move the cursors on either
side of the screen to Engineering. Press the select
button on the left to select Engineering. (See Figure 13)
[Install Set-Up
Diagnostics
SELECT
4. Use the arrow keys and SELECT button to set each digit
to match the film code for the corresponding item
number. After the last digit has been set, press the
SELECT button to save the film code. (See Figure 15)
>Film Type
SELECT
Reset
MENU
]
BACK
Figure 13
FILM TYPE 4S
A08C*
^
BACK
Figure 15
Up
Arrow
Down
Arrow
Stop
Key
0521 IH-7259