Quantum R-NET CJSM2 Manual De Instrucciones página 3

NOTE: The following information is an addition to the information
contained in the Basic Operating Instructions provided with your R-net
controller. It explains how to operate your iLevel® power elevating
seat. Please retain this information for your records and contact your
Quantum Rehab Provider with any questions.
iLevel® Feature (Optional)
Your power chair may be equipped with the iLevel® feature that will be
used in conjunction with your TRU-Balance® 3 Power Positioning System.
The iLevel® feature is mounted on a Quantum power base for enhanced
stability when the seating system is elevated.
There are certain situations, including some medical conditions, where the
power chair user will need to practice operating the power chair equipped
with iLevel® in the presence of a trained attendant. A trained attendant can
be defi ned as a family member or care professional specially trained in
assisting a power chair user in various daily living activities.
As you begin using iLevel® during daily activities, you will probably
encounter situations in which you will need some practice. Simply take your
time and you will soon be in full and confi dent control.
Elevation (Seat Screen)
The iLevel® feature can be activated by selecting the elevating seat actuator.
To select and adjust the seat elevation using the R-net Controller:
1. Push the On/Off button once to power on the controller.
2. Push the Mode button several times until the seat screen is displayed
on the LCD.
3. Push the joystick to the left or right to cycle through to the elevating seat
mode. This is illuminated on the actuator indicator. See fi gure 1.
NOTE: If your R-net settings are different than those described, contact
your Quantum Rehab Provider. Your Quantum Rehab Provider may
have changed the programming of your R-net Controller.
4. When the elevating seat mode is selected, give a forward command to
the joystick to adjust position in one direction or give a reverse command
to the joystick to adjust position in the opposite direction.
5. If you want to return to another profi le, push and release the Mode
Button until you return to the desired drive profi le.
Product Insert
