Quantum R-NET CJSM2 Manual De Instrucciones página 4


To activate the iLevel® using a single switch:
1. Press once and hold the single switch to raise the seat and activate
iLevel®.
2. Press and hold the single switch to lower the seat.
NOTE: The iLevel® feature is automatically engaged when the power
elevating seat is activated and the iLevel® indicator is displayed on
your controller. See fi gure 2.
The power chair should be used on an indoor, level surface, such as malls,
offi ces, and/or medical facilities to activate iLevel®. Once the seating
system actuator is started, the iLevel® boots limit movement of the front
caster wheels and restrict the power chair to 1 in.–1.5 in. (2.54 cm–3.81
cm) of climbing ability.
WARNING! The iLevel® feature should be used only on fl at,
level, indoor surface, such as in malls, offi ces, and/or medical
facilities. Never raise the seat from its lowest position on an
inclined surface. Failure to heed this warning can result in the
power chair tipping over.
WARNING! The iLevel® feature is intended for limited outdoor
use on only fl at, level, hardscape surfaces. If you are unsure of
your environment, do not use iLevel® outdoors.
PROHIBITED! Never use the iLevel® outdoors on uneven terrain
(gravel, hills or other uneven, non-compact terrain) or in fi elds.
WARNING! Never raise the seat into iLevel® when operating
your power chair on bumpy or uneven surfaces. Failure to heed
this warning can result in the power chair tipping over.
WARNING! Always fasten the positioning belt when operating
the power chair.
WARNING! Do not operate the iLevel® or change the seat height
in any way while your power chair is positioned under a fi xed
object, such as a table or a desk. Keep area clear prior to and
during movement.