Troubleshooting (cont.)
General Features
Symptoms
Probable Causes
C. The LED power
2.
Power light is
A. Power cord may be
not on.
B. The Ground-Fault
C. The circuit breaker
D. None of the above
3.
The seat is
A. The mounting
loose.
Cleansing Features
Symptoms
Probable Causes
1.
There is no
A. The water supply
water flow.
B. The seat sensor is
2.
The water
A. The filter screen is
pressure is low.
3.
Water stops
A. Washing
flowing from
the spray wand
before
cleansing is
complete.
B. The seat sensor
1054180-5-H
Recommended Action
C. Press the "Power"
indicator is off.
icon.
A. Check the power
loose or
cord connection.
disconnected.
B. Reset the GFCI or
Circuit-Interrupter
RCD.
(GFCI) or Residual
Current Device
(RCD) is tripped.
C. Reset the circuit
has been tripped.
breaker.
D. Contact a Kohler
actions correct the
Service
symptom.
Representative.
A. Tighten the fasteners.
plate fasteners are
Refer to the
loose.
Installation Guide.
Recommended Action
A. Open the water
stop is closed.
supply stop.
B. See activating the
not detecting the
seat information in
the "Operation"
user.
section.
A. Clean or replace the
clogged.
filter screen. See the
"Cleaning the Filter
Screen" section.
A. Press the "FRONT"
or "REAR" icon to
automatically stops
one minute after
restart cleansing.
pressing a spray
icon.
B. See activating the
does not detect the
seat information in
the "Operation"
user.
section.
12
Kohler Co.