EGO HT2500 Manual Del Operador página 23

WARNING:
and the rear handle to hold the hedge trimmer during operation.
WARNING:
Do not attempt to remove cut material or hold material to be cut when the blades
are moving. Make sure that the blades have totally stopped and the battery pack is
removed before clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit.
WARNING:
as cords, lights, wire, or string which can become entangled in the cutting blade and
create a risk of serious personal injury.
 Do not trim too much at one time. This can cause the blades to bind and slow,
reducing the cutting efficiency.
 For new growth, a wide sweeping action is suitable for stems fed directly into
the cutting blade. For older growth, a sawing movement is good for trimming the
thicker stems. A non-powered hand saw or pruning saw is suggested for trimming
large stems first.
TOP CUTTING
Use a wide sweeping motion. A slight
downward tilt of the cutting blades in the
direction of motion gives the best cutting
results. For a better cutting effect, you may
use the string to guide the hedge level(Fig.
5).
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2500/HT2500-FC
To prevent serious personal injury, always use both the front handle
To prevent serious personal injury, keep hands away from blades.
Clear the area to be cut before each use. Remove all objects, such
5
23