Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
:
ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
WARNING
:
construction activities contains chemicals known to the state of California to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING:
permanent respiratory or other injury. Always use NOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face and body.
SYMBOLS
The label on your tool may include the following symbols:
V ..................volts
Hz ................hertz
min ..............minutes
.............direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
IPM.............impacts per minute
............Read instruction manual before use
................Use proper eye protection
• When using an extension cord, be
sure to use one heavy enough to
carry the current your product will
draw. An undersized cord will cause
a drop in line voltage resulting in
loss of power and overheating.
The following table shows the
correct size to use depending on
cord length and nameplate ampere
rating. If in doubt, use the next
heavier gauge. The smaller the
gauge number, the heavier the
cord.
Always wear proper personal hearing protection that conforms to
Some dust created by power sanding, sawing, grinding, drilling, and other
Use of this tool can generate and/or disperse dust, which may cause serious and
Volts
120V
240V
Ampere Rating
More
Than
0
6
10
12
SAVE ThESE INSTRUCTIONS
A ...................amperes
W ..................watts
................alternating current
n o .................no load speed
.................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
reciprocation per minute
BPM ............beats per minute
.................Use proper respiratory protection
.................Use proper hearing protection
Minimum Gauge for Cord Sets
0-25
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
0-50
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Not more
American Wire Gauge
Than
-
6
18
-
10
18
-
12
16
-
16
14
4
Total Length of Cord in Feet
26-50
51-100
51-100
101-200
16
16
16
14
16
14
12
Not Recommended
101-150
201-300
14
12
12
Publicidad
Tabla de contenido
