Before First Use - Hamilton Beach 26046 Manual De Instrucciones

How to Use Waffle Grids
1
Plug cord into wall outlet.
The red Power ON light will glow.
TIP: A small amount of nonstick
cooking spray can be used on the
grids before preheating.
5
6
840216601 ENv01.indd 6 840216601 ENv01.indd 6
2
Choose desired waffle temperature
setting and preheat with cover
closed until the green READY
light comes on.
TIP: Waffle color and crispness
are determined by the
temperature of the grids. The
higher the temperature, the
browner and crisper the waffle.
Using an oven mitt, open cover. Remove waffle with plastic or
wooden utensil. Never use metal. This will damage the nonstick
coating of the appliance. Turn control to "MIN." Unplug unit when
through cooking. Let cool.
WARNING! Burn Hazard. Always use an oven mitt to protect hand
when opening a hot waffle maker. Escaping steam can burn.
BEFORE FIRST USE: Wash grids in dishwasher or in hot, soapy
water. Rinse and dry. Wipe or brush waffle grids with vegetable
oil. This is only recommended before first use, but may be
necessary afterwards.
3
Raise cover and pour two FULL
premeasured scoops of batter
onto center of bottom cooking
grid. Lower cover.
TIP: When adding nuts, fruits,
or chocolate chips to your waffle,
reduce the waffle batter by
2 Tablespoons (30 ml).
4
Waffles are done in about 6 to
8 minutes, depending on the
setting, recipe, when the green
READY light turns back on, or
when steaming begins to stop.
Do not preheat or operate unit
unless grids are in place.
7/9/12 11:18 AM 7/9/12 11:18 AM