Zagg Speaker Case Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION
The ZAGG Speaker Case is a protective bumper case that features a
removable, wireless Bluetooth® speaker that's perfect for boosting music,
conference calls, videos, and games. It also has a built-in battery that
powers the speaker without draining your phone's battery. Because it's
separate from the phone, you can use the battery's 1800mAh of power to
charge your phone, or share it via the built-in USB outlet. Amazing sound
and portable power have never been easier.
INSTALLING YOUR SPEAKER CASE
In order to enjoy the Speaker Case's protection and
removable speaker, you must first install the included
bumper case. Once the case is on, connecting the speaker
is a snap.
1. Align the access holes and volume buttons on the bumper case with those
on your phone.
2. Slide the top of your phone into the top of the bumper case.
3. Press your phone into the case starting from the top and working down
along the edges until the case has settled onto your phone. Make sure to
check the corners for a proper fit.
4. With the bumper case on, align the speaker so that the angled portion is
at the top (so it doesn't interfere with your phone's camera) and the flat
side is at the bottom.
5. Press the speaker onto the bumper case. Note: you may not hear a
click when the case and speaker connect; that's okay. Press around the
perimeter of the speaker to ensure it has seated correctly.
6. To remove your speaker from the bumper case, grasp the angled part
of the speaker and pull away from the case. You may need to slide your
fingers along the perimeter of the speaker to get it fully separated from
the case.
1

Publicidad

Tabla de contenido
loading

Productos relacionados para Zagg Speaker Case

Tabla de contenido