Zagg Speaker Case Manual De Instrucciones página 3

7. To remove the bumper case from your phone, press the back of your
phone as you lift and roll a corner of the case off. Continue around your
phone until the case comes free.
POWERING AND PAIRING
Simply turn your Speaker Case on, pair it, and enjoy hours of amplified
music and calls everywhere you go. Here's how:
1. Make sure your phone's Bluetooth connection is enabled.
2. Press and hold the power button until you hear a power up
tone. The LEDs above the power button will light blue and
begin flashing indicating your speaker is on and ready to pair.
3. Select "ZAGG Speaker Case" from your phone's list of available
Bluetooth devices. Depending on your phone, you may need to select
"Pair" or "Connect" for it to complete the pairing process. A tone
will sound indicating your phone and the speaker have paired. Once
it has been paired with a device, your Speaker Case will remember
and automatically pair to the same device again the next time the
speaker is turned on. The speaker can remember up to eight devices
for automatic pairing and will first pair to the most recent device,
assuming that device is available, and go down its list until it finds
a device to pair with. If no device is found from memory, a tone will
sound indicating you need to pair the speaker with your device.
4. When you are ready to turn your speaker off, press and hold the power
button for three seconds, or until you hear the power off tone.
2