Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Route the cables through the bracket, then align the base plate to the holes and fix it to the ceiling with
four screws.
3.
Use the wrench to fix the head cover on the bracket.
Note:
Make sure the radar module can directly face to the moving target.
4.
Hook the speed dome to the bracket with supplied safety rope.
5.
Connect the cables, and align the speed dome with the head cover, using wrench to tighten the screws
① on the head cover.
Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details.
Figure 2-7 Pendant Mount
Figure 2-8 Route the Cables and Fix the Bracket on the Ceiling
Figure 2-9 Fix the Head Cover
Figure 2-10 Use Safety Rope to Hook the Camera with Bracket
7
Publicidad
Tabla de contenido
