Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
CABINET MODELS: CLW1526GS, CLW1526GW, CLW1526SS, CLW1526SW, CLW1526WS, CLW1526WW
CLW2026GS, CLW2026GW, CLW2026SS, CLW2026SW, CLW2026WS, CLW2026WW
GENERAL NOTES
1. If you are surface mounting the cabinet on the wall
see instructiosn on page 2.
2. A surface mounted cabinet requires the optional
CLSK26 Mirror kit supplied with your cabinet.
3. If you are recessing the cabinet in the wall,
see instructions below.
4. Call our customer service - 1.800.877.2376
between 8 a.m. and 5 p.m. E.S.T. If you have any
questions or require parts. Have the serial number
from inside the cabinet before you call.
701 N. Wilson Ave. • Bristol, PA 19007
1. RECESSING THE CABINET INTO THE WALL.
Fig. 1
Fig. 2
Install screws through
holes in cabinet as
shown in Fig. 1
DO NOT OVER-
TIGHTEN!
CLW CABINET INSTRUCTIONS
Top View
Cabinet flange fits
flush against wall.
One Year Limited Warranty
Kohler, Inc. products are warranted to the original consumer purchaser to be free from defects in material and
workmanship for one (1) year from the date of installation. Kohler will, at its election, repair or replace the product,
or make appropriate adjustment to the product where Kohler's inspection discloses any such defects occurring in
normal residential usage within one year after installation. Other than the costs noted above, Kohler is not liable for
any direct or indirect costs associated with the repair or replacement of the product including removal, installation
or reinstallation of the product. In no event shall Kohler's liability exceed the purchase price of the product. The
warranty is void in the event the product failure is caused by abuse, misuse, abnormal usage, faulty installation,
damage in an accident, improper maintenance, or any repairs other than those authorized by Kohler.
Kohler cabinet door hinges and opening devises carry a lifetime limited warranty against defects in material and
workmanship, good for as long as the original consumer purchaser owns his or her home. If the hinges or opening
devices should fail during normal residential use, Kohler will, free of charge, mail to the purchaser a replacement
part.
Kohler products are not manufactured for commercial use. Kohler hereby disclaims all express or implied warranties
for Kohler products used commercially.
To obtain warranty service, contact your Dealer directly. If you are unable to contact your dealer contact Kohler,
Inc. at 701 N. Wilson Ave., Bristol PA 19007 or call 1-800- 877-2376.
IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. SELLER
DISCLAIMS ANY LIABILITY FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Some states/
provinces do not allow limitation on how long an implied warranty lasts, or the exclusion or limitation of special,
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights. You may also have other rights which vary from state/province to state/province.
Permission to return any merchandise under this warranty must be authorized by Kohler and returned prepaid by
the purchaser.
THIS IS OUR EXCLUSIVE WRITTEN WARRANTY.
Stud and wall
surface
Install dome caps
over screws.
1
ROUGH OPENING DIMENSIONS
14 1/4"W for CLW15 Models
19 1/4"W for CLW20 Models
Mounting location for
#8 x 1 1/2" philips
head screws
SS486 CLW Cabinets
Publicidad
Manuales relacionados para Kohler CLW Serie
Resumen de contenidos para Kohler CLW Serie
- Página 1 1. If you are surface mounting the cabinet on the wall workmanship for one (1) year from the date of installation. Kohler will, at its election, repair or replace the product, or make appropriate adjustment to the product where Kohler’s inspection discloses any such defects occurring in see instructiosn on page 2.
- Página 2 2. SURFACE MOUNTING THE Fig. 3 CABINET ON A WALL. A. Install Mounting Bar. CLW20 4 1/2" from edge 1. Drill two 3/16 holes in bottom mounting bar at indent location. Use the supplied anchors or locate studs if possible. CLW15 2"...
- Página 3 3. ATTACHING SIDE KITS TO A SURFACE 4. DOOR ADJUSTMENTS MOUNTED CABINET A. This screw releases the door from the cabinet and allows up and down adjustment. Fig.7 1. Apply foam tape to Side kit bracket A. Peel tape from sheet, leave liner on. B.
- Página 4 5. INSTALLING THE TOOTHBRUSH COVERS & DOOR BUMPERS – see Fig. 9 1. Push the toothbrush covers into place, one up, one Fig. 9 down, one up, one down. Door 2. These covers can be “wiggled “ free to clean the Bumpers bristle area when required.
-
Página 5: Instrucciones Para Gabinete Cl
INSTRUCCIONES PARA GABINETE CL GABINETES: CLW1526GS, CLW1526GW, CLW1526SS, CLW1526SW, CLW1526WS, CLW1526WW CLW2026GS, CLW2026GW, CLW2026SS, CLW2026SW, CLW2026WS, CLW2026WW Notas generales Garantía limitadaTérmino de un año 1. Si está montando el gabinete sobre la superficie de la Robern garantiza al comprador original que, a su criterio, reparará, reemplazará o hará pared consulte las instrucciones de la página 6. - Página 6 2. Cómo montar superficialmente el Fig. 4A gabinete en una pared. * El fondo del gabinete Tornillo #8 x 2 pulgadas se asienta en el labio Instale la barra de montaje. (El paso uno varía según el de la barra de montaje cabeza hexagonal y tipo de gabinete que tenga, consulte más abajo).
-
Página 7: Cómo Instalar Los Juegos Laterales En Un Gabinete De Montaje Superficial
3. Cómo instalar los juegos laterales en 4. Ajustes de la puerta un gabinete de montaje superficial A. Este tornillo afloja la puerta del gabinete y permite ajuste hacia arriba y hacia abajo. Fig. 9 1. Ponga cinta de hule espuma al soporte del juego lateral A. - Página 8 Fig. 9 Fig. 10 Cubiertas de cepillos dentales Topes de puerta 6. Cómo instalar los entrepaños – consulte la Fig. 10 1. Empuje y gire los pernos en su lugar A. Empuje un lado del entrepaño en el sujetador izquierdo o derecho. B.