Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

General Notes
1. This cabinet is designed to mount into 14" wide x 18"
high to 24" high wall openings, 4" deep.
2. The wall opening should be framed with studs 16" on
center to match the cabinet screw holes.
3. The cabinet accessories mount in the cabinet in both
left or right door hand configurations.
4. If you have purchased the optional CLL20TW Light kit
refer to the instructions supplied for layout and wiring.
5. You will need to use the light fixture spacer when
using the CLL20TW Light kit supplied with light.
6. Call our customer service number shown on right
between 8 and 5 E.S.T. if you have any questions or
require parts.
Limited Warranty One Year Term
ROBERN warrants to the original purchaser that, it will, at its elec-
tion repair, replace, or make appropriate adjustment to products
made by this company shown to have significant defects in mate-
rial or workmanship which are reported to ROBERN in writing
within one (1) year from the date of delivery. ROBERN is not
responsible for installation costs.
The warranty is void in the event the product is damaged in transit,
or if damage or failure is caused by abuse, misuse, abnormal
usage, faulty installation, damage in an accident, improper mainte-
nance, or any repairs other than those authorized by ROBERN.
At the expiration of the one year warranty period, ROBERN shall
be under no further obligation under any warranty, expressed or
implied, including the implied warranty of merchantability.
ROBERN shall not be liable for any consequential damages aris-
ing out of or in connection with the use or performance of its
products. Some states do not allow limitations on how long an
implied warranty lasts or do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Any liability against ROBERN under any implied warranty, includ-
ing the warranty of merchantability, is expressly limited to the
terms of this warranty. Permission to return any merchandise
under this warranty must be authorized by ROBERN and returned
prepaid by the purchaser. Claims under this warranty should be
sent directly to your dealer.
CLR Recess Inst. SS422
09/02 Rev. 9 cabfax #0422
CLR2026FW RECESS CABINET
Part List – CLR Recess Cabinet
1. Cabinet Body
(REPBOXCLR)
2. Door
(DXCLC20FW)
3. Glass Shelves
– Shelves
(SHLFCLR20)
4. Hardware Bag • BAGLRW • Contains the Following
A. Screw Caps (SS341)
B. Door Bumpers (SS340)
C. #8 x 1 1/2" Phillips head screws (SS328)
D. Toothbrush covers (SS262)
E. Hinges (SS259)
F. Hinge Mount Screws (SS829)
G. 4 Hinge Door Screw (SS679)
1
701 N. Wilson Ave.
Bristol, PA 19007
800.877.2376
SS422 CLR RECESS CABINET

Publicidad

loading

Resumen de contenidos para Kohler CLR2026FW

  • Página 1 701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 CLR2026FW RECESS CABINET General Notes 1. This cabinet is designed to mount into 14” wide x 18” Part List – CLR Recess Cabinet high to 24” high wall openings, 4” deep. 2. The wall opening should be framed with studs 16” on center to match the cabinet screw holes.
  • Página 2 1. Recessing the cabinet to wall 18" high to 24" high Mounting location for #8 x 1 1/2" philips head Rough out screws. Use caps to dimensions cover screw heads 14" wide (up to 14 1/4") 16" stud centers Fig. A *3"...
  • Página 3 2. Attaching the Interior Cabinet Shelves 4. Door Adjustment and Mounting 1. Push shelves (Fig. C) in to place on left and right sills until firmly in place. 3. Attaching the optional Light Spacers (when using the CLL20TW Light Fixture) Fig.
  • Página 4 5. Installing the Toothbrush Covers & Door Bumpers 1. Push the toothbrush covers into place, one up, one down, one up, one down. 2. These covers can be “wiggled “ free to clean the bristle area when required. 3. Each door can hold four brushes, –...
  • Página 5: Hoja De Instrucciones Para El Gabinete Empotrado

    701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 Hoja de instrucciones para el gabinete empotrado Modelo: CLR2026FW Notas generales: Piezas suministradas junto con el gabinete. 1. Este gabinete está diseñado para ser montado en Asegurese de comprobar los soportes de carton en aberturas de pared de 35,56 cm (14 pulg.)
  • Página 6 1. Empotrando el gabinete en una pared. 45, 72 a 60, 96 (18 a 24 pulg.) de altura Ubicación de montaje para los tornillos con Dimensione cabeza Phillips Nº 8 x 1 s de la abertura 1/2 pulg. Utilice tapas para cubrir las tornillos 35, 56 cm (14 pulg.) de ancho (hasto 36, 2 cm [14 1/4 pulg.]...
  • Página 7: Ajuste Y Montaje De La Puerta

    2. Instalación de los accessorios 4. Ajuste y montaje de la puerta interiores del gabinete. 1. Empuje el refuerzo del soporte central dentro del espacio entre los estantes en la Fig. C. 3. Instalación de los espaciadores para la luz opcional (al utilizar al artefacto luminoso CLL20TW).
  • Página 8 5. Instalación de las cubiertas para los cepillos de dientes y los topes de la puertas. 1. Empuje las cubiertas para los cepillos de dientes en su sitio, uno hacia arriba, uno hacia abajo, uno hacia arriba, uno hacia abajo. 2.
  • Página 9: Remarques Générales

    701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 ARMOIRES ENCASTRÉES CLR2026FW Remarques générales 1. Cette armoire est conçue pour être montée dans une Liste des pièces - Armoire encastrée CLR ouverture murale de 35,6 cm de largeur x 45,7 à...
  • Página 10 1. Encastrement de l’armoire dans un mur 45,7 à 61 cm de hauteur Emplacement de montage des vis à tête Dimensions de l'ouverture Phillips No. 8 x 1 1/2 po. de montage Couvrir les vis avec leurs capuchons. 35,5 cm de largeur (jusqu'à...
  • Página 11 2. Installation des étagères 4. Réglage et montage de la porte 1. Glisser les étagères (fig. C) sur les supports gauche et droit, de façon à ce qu’elles soient solidement maintenues. 3. Installation des pièces d’écartement d’éclairage en option (si le kit d’éclairage CLL20TW est utilisé) Fig.
  • Página 12 5. Installation des capuchons de brosses à dents et butoirs de porte 1. Mettre les capuchons de brosse à dents en place, un vers le haut, un vers le bas, un vers le haut, un vers le bas. 2. Ces capuchons peuvent être « libérés » pour nettoyer l’emplacement de la tête des brosses. 3.