HACH LANGE HQ440d Manual Básico Del Usuario página 8

Figure 7 Dual-screen display
1 Probe that is connected to port on left
2 Probe that is connected to port on
right
Navigation
The meter contains menus to change various options. Use the
keys to highlight different options. Push the RIGHT key to select an
option. There are two ways to change options:
1. Select an option from a list: Use the
option. If check boxes are shown, more than one option can be
selected. Push the LEFT key under Select.
Note: To deselect check boxes, push the LEFT key under Deselect.
2. Enter an option value using the arrow keys:
Push the and keys to enter or change a value.
3. Push the RIGHT key to advance to the next space.
4. Push the RIGHT key under OK to accept the value.
8 English
3 Measurement information for probe
on left
4 Measurement information for probe
on right
and
and keys to select an
Start-up
Turn the meter on and off
Push the key to turn on or turn off the meter. If the meter does not turn
on, make sure that the AC power supply is properly connected to an
electrical outlet or that the batteries are properly installed.
Change the language
The display language is selected when the meter is powered on for the
first time. The language can also be changed from the Meter Options
menu.
Access to the language menu can be restricted with the Security Options.
For additional information, refer to the CD.
1. Push the key and select Language.
2. Select a language from the list.
Note: While turning the meter on, the language can also be changed when the
power key is pushed and held.
Change the date and time
The date and time can be changed from the Date & Time menu.
1. Push the key and select Date & Time.
2. Update the time and date information:
Option Description
Format Select one of the formats below for the date and time. Use the
and keys to select from the format options.
dd-mm-yyyy 24h
dd-mm-yyyy 12h
mm/dd/yyyy 24h
mm/dd/yyyy 12h
dd-mmm-yyyy 24h
dd-mmm-yyyy 12h
yyyy-mm-dd 24h
yyyy-mm-dd 12h