COMMISSIONING AND SETTINGS
Commissioning
Carefully unpack the unit and all accessories and remove the packing
material. Connect the power cord to a standard household power outlet.
Press the ON/OFF button on the control panel to turn on the machine.
Selecting the Mode
Press MODE or FUNCTION repeatedly to select between FM, CD, USB, SD,
BT and Phono modes.
Adjusting the volume
Adjust the output volume with the VOL+/- buttons.
Line Out Switch
If you have connected the unit to a stereo system/PA or other audio device
via RCA cable, use the switch on the rear panel to switch the line out on/off.
Setting the Time
•
After switching on, the display shows the time 00:00.
•
Press and hold PROG for 3 - 5 seconds to select between the display
formats 12H or 24H. Use the arrow keys to select, then press PROG to
confirm.
•
The hour digits will now flash. Use the arrow keys to set the hour, then
press PROG to confirm and continue.
•
Repeat for the minutes.
Note: The time is not stored when the unit is unplugged from the power
supply.
EN
23