Connections - Denon DRR-201SA Instrucciones De Operación

4

CONNECTIONS

Connecting to the 201SA Series
When connecting to a pre-main amplifier other than the one in the PMA-201SA there is no need to make connection
2
3. Note that in this case none of the system functions (auto power on, etc.) will work.
• System operations such as the auto power on function
can only be used if stereo audio cords and system cords
are connected between all the system components. Be
sure to securely connect all the connection cords
between all the units.
• Disconnecting a system cord during system operation
may result in malfunction. Be sure to unplug the power
cords before changing the connections.
Plug into the open SYSTEM CONNECTOR jack of another
component. Any SYSTEM CONNECTOR jack is OK.
PMA-201SA
(Pre-main amplifier)
INPUTS PB
CD DVD/AUX AUX-2 TAPE MD
1 2
SYSTEM
L
CONNECTOR
R L
SIGNAL
GND
TUNER PHONO TAPE MD
L
R
R
SPEAKER SYSTEM
REC
SPEAKER IMPEDANCE
4 16
All manuals and user guides at all-guides.com
• Install the components in such a way that the ventilation
holes of the pre-main amplifier (PMA-201SA) are not
obstructed.
Power cord
(for U.K. model)
4
Power plug
AC 230 V 50Hz
DRR-201SA
(Plug into a power outlet)
(Cassette deck)
3
DRR-201SA
(this unit)
LINE
OUT IN
SYSTEM
CONNECTOR
L
1 2
R
1
2
Connect the DRR-201SA's LINE OUT jacks to the
1
pre-main amplifier's TAPE input jacks using the
included stereo audio cord.
Connect the DRR-201SA's LINE IN jacks to the
2
pre-main amplifier's TAPE output jacks using the
included stereo audio cord.
Connect the DRR-201SA's SYSTEM
CONNECTOR jack (1 or 2) to the SYSTEM
3
CONNECTOR jack (1 or 2) of one of the other
components using the included system cord.
Connect the included power cord to the power
4
input connector, then plug it into a wall power
outlet.
The DRR-201SA can also be used when connected
to a pre-main amplifier other than the PMA-201SA.
In this case, none of the system functions (auto
power on, etc.) will work.
Some pre-main amplifiers are equipped for
connections of two or more cassette deck's,
allowing tapes to be copied. Read your pre-main
amplifier's operating instructions carefully before
using it.
1 3 2
DMD-201SA POWER LOADING MECHANISM
ON / STANDBY 5 INPUT MEMO REC / CHARACTER EDIT CD SRS MULTI REC
REC LEVEL / ENTER
8 9
+
MINIDISC RECORDER DMD-201SA
1 3 2
C
ON / STANDBY 5 8/6 7/9
DCD-201SA
TRACK INDEX TIME
M S
COMPACT DISC PLAYER DCD-201SA
ENGLISH
Recommended System Installation
• To ensure performance and stability, install the 201SA
series as shown below.
• Do not place another component directly on top of the
pre-main amplifier (PMA-201SA).
• For stability, do not stack more than three components
on top of each other.
• To ensure stability, do not stack more than three units.
NOTES:
• Do not plug power cords into power outlets until all
connections have been completed.
• Check the left and right channels and be sure to
interconnect them correctly (R to R, L to L).
• Plug in the power cords securely. Incomplete
connections will result in noise.
• Clasping the power cords and connection cords
together may result in humming or noise.
• After unplugging the power cord, wait at least 5
seconds before plugging it back in.
PMA-201SA
VOLUME
™ ON / STANDBY ¡ OFF MODE SOURCE DIRECT
PHONES FUNCTION
INTEGRATED AMPLIFIER PMA-201SA
PRESET / TUNING
DOWN UP
TU-201SA
ON / STANDBY TIMER BAND / RDS MEMORY / SET
MHz CH
TUNED STEREO AUTO
AM-FM STEREO TUNER TU-201SA
1 2
DOLBY REVERSE 4 REC
ON / STANDBY 5 NR / RESET CD SRS / REC MUTE
DRR-201SA
REC LEVEL / 0 1
8 9
L 6 7
dB -60 -40 -30 -20 -12 -6 -2 0
R
+
3 DOLBY NR B
STEREO CASSETTE TAPE DECK DRR-201SA
5