Important Safeguards; Before Using For The First Time - Russell Hobbs 21510-56 Instrucciones

Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance. Keep the appliance and
cable out of reach of children.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
Care must be taken when handling sharp cutting blades during emptying
and cleaning.
h Never process liquid over 40°C, as it may be ejected due to steaming.
Misuse of the appliance may cause injury.
If the cable is damaged, return the appliance, to avoid hazard.
L Don't put the motor unit in liquid.
• Don't use accessories or attachments other than those we supply.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't use the appliance if it's damaged or malfunctions.
• Do not operate the appliance continuously for longer than 30 seconds without giving it a
rest time of 45 seconds.
DIAGRAMS
1. Buttons
2. Motor unit
3. Splash guard *
4. Tab
* The splash guard is already fitted to the motor unit.

BEFORE USING FOR THE FIRST TIME

• Wash everything except the motor unit in warm, soapy water. Rinse and dry.
• Wipe the motor unit with a damp cloth.
USING
1. Unplug the appliance.
2. Lift the motor unit off the bowl.
3. If it is not already fitted, fit the splash guard to the underside of the motor unit by clipping it
in place. Do not operate the blender without the splash guard fitted.
4. Hold the blade unit by the plastic part (Fig. A).
5. Lower the blade unit over the spindle in the bottom of the bowl. You may have to turn it
slightly, to fit it over the spindle.
6. Put the food in the bowl. Don't fill above the max mark. Don't fill above the V mark with
liquids or soft foods like cheese.
7. Lower the motor unit on to the bowl.
8. Put the plug into the power socket.
9. Press the • button for low speed, release it to switch off.
10. Press the •• button for high speed, release it to switch off.
HOUSEHOLD USE ONLY
5. Blade unit
6. Storage lid/non-slip base (x 2)
7. Bowl (x 2)
8. Spindle
3