User Interface; Inputs And Outputs; Power Supply Specifications (Absorption) - dBTechnologies VIO S118 Manual Del Usuario

USER INTERFACE

Indicator LEDs:
Status LEDs (RDNet network)
Controls

INPUTS AND OUTPUTS

Power supply inputs and re-links:
Audio inputs:
Audio outputs:
RDNet inputs/outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (ABSORPTION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Max number of modules per power
supply line (**)
[mains input + mains link]:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
VIO-S118
62
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
Polarity (0°/180°), Delay (0-9,9 ms), Cardioid function, Xover
frequency (
60-70-75-80-85-90-100-110-Fullrange
PowerCON® True In/Link
1x XLR IN balanced (insulation: Floating ADC)
1x XLR link OUT balanced, HPF Xover audio
Data In / Data Out (etherCON® connectors)
1.4 A (220-240V~) - 2.7 A (100-120V~)
3.4 A (220-240V~) - 6.8 A (100-120V~)
1+3 (220-240V~) / 1+1 (100-120V~)
), Sub Attenuation, Test
1x USB type B
35 W
3 A
Cod. 420120259 REV. 1.0
English