Malfunctions And Solutions - AIR8 260i NANO Manual De Instrucciones

Malfunctions and solutions

If any of the following problems occur, immediately turn off the device and contact our
AIR8 specialists.
•
Fuse has blown.
•
Exterior material gets into the device.
• The plug or power cord heats up or appears to be damaged.
Do not open the device without the presence of an AIR8 specialist.
In case of non-dangerous malfunctions, here is a list of solutions that you can perform:
The device cannot be switched on:
•
Is the plug inserted correctly?
•
Has the fuse blown or is there no voltage in the socket?
•
Is the front cover fitted correctly?
The air flow at the outlet opening is lower:
•
Is the filter too dirty or clogged?
• Have you removed the filter packaging and protective foil?
The device is disproportionately loud:
• Is the device stood on an uneven surface?
•
Have you removed the filter packaging and protective foil?
•
Is the filter too dirty or clogged?
The remote control does not work:
•
Replace the battery.
Smoke and odours are poorly filtered:
• Are the filters inserted in the correct way?
•
Have you removed the filter packaging and protective foil?
• Do the filters have to be replaced?
This product must not be disposed of with household waste.
a recycling point for electronic and electrical equipment.
This air purifier must be disposed of at
14