Care And Maintenance - Hoover WINE COOLER Manual De Usuario

Read Only mode → product is in Remote
Control. Pressing the wifi button the display
will show "Rd" for 5 second (during these five
^
sec the buttons have to be disabled.).
After 5 sec the wine cooler program will be set
on the last temperature and program selected
or the default one if the temp and program
have been never changed. Wifi Led will be 1sec
on and 3sec off.
Wifi reset→ just from Read only mode the wifi
functionality could be reset. Pressing wifi
button for 5 seconds the wifi will reset. The
LDC (in the upper part) will show "rr" and the
product will stay in the last program selected
showing the temp. All the connection data will
be deleted from the device. This means that
the customer has to repeat all the enrollment
procedure. The wifi led will be switched off.
Power off of product or net black out →
Product will go to read only mode at the next
switch on.
Additional notes:
- When product tries to connect to a router
wifi led blinks 3 seconds on 1 second off. This
condition may happen when product is
enrolled but router signal is lost.
- When product is switched off the wifi module
switches off but if enrollment has been
successfully completed it keeps all data stored
for next power on.
WIFI functionality.
After wifi enrolment the customer could use
the "Hoover wizard APP" to manage the
program and temperature and light in remote
control. Selecting the specific program or
temperature the UI will update the status in
terms of led and digit. For more detail check
the functionality spec of APP.
Shelves
Shelf is chrome plated or wooden wine rack.
To accommodate different size bottles, they
can be moved up or down by sliding them out
the tracks first. Shelves are designed to
accommodate maximum amount of bottles.
Wine Rack
There is an additional wine rack at bottom
section of the unit where you can store up to 6
wine bottles. This rack is removable for
cleaning purpose.
There is a 4 to 6 C variance between the top
and bottom shelves of the wine chiller.
Therefore, If you have set the wine chiller for
red wine only and you want to place a mix of
white and red wines, you should place the
white wine bottles on the bottom shelves and
the red wines on the top shelves.

CARE AND MAINTENANCE

Cleaning Your Wine Cooler
• Unplug the wine cooler and remove the
bottles.
• Wash the inside with a warm water and
baking soda solution. The solution should be
about 2 tablespoons of baking soda to a liter
of water.
• Wash the shelves and trays with a mild
detergent solution.
• The outside of the wine cooler should be
cleaned with mild detergent and warm
water.
• It may also be necessary to periodically wipe
the bottom part of the storage area, as the
wine cooler is designed to retain humidity,
and condensation may collect there.
Maintenance of Your Wine Cooler
Power Failure
Most power failures are corrected within a few
hours and should not affect the temperature
of your wine cooler if you minimize the
number of times the door is opened. If the
power is going to be off for a longer period of
time, you need to take the proper steps to
protect your contents.
Vacation Time
During long absences, remove all the bottles;
unplug your wine cooler, clean your wine
cooler, and leave the door open slightly to
avoid possible formation of condensation,
mold, or odors.
Moving Your Wine Cooler
• Remove all the bottles.
31