Installation; Additional Handle; Fitting A Tool; Removing A Tool - Parkside PAH 1300 A1 Traducción Del Manual De Instrucciones Original

Installation

Additional handle:

♦ You can position the additional handle
you wish.
♦ Undo the knurled nut
♦ Swing the additional handle
appliance axis or 180° forward or backward
into the desired position (see foldout page).
♦ Retighten the knurled nut

Fitting a tool:

♦ Pull the locking sleeve
♦ Insert the tool with a rotating movement in the
tool holder until it clicks into itself.
♦ Release the locking sleeve
This locks the holder.
Check that the tool is properly locked by pulling
it. The system has radial play because of the
design.

Removing a tool:

♦ Pull the locking sleeve
the tool out of the tool holder

Adjust chisel position:

♦ You can adjust the flat chisel
working position.
♦ Place the flat chisel
♦ Push the chisel adjustment ring
turn with the chisel adjustment ring
chisel to the required position.
♦ Release the chisel adjustment ring
him until it clicks.
PAH 1300 A1
as
.
around the
.
backwards.
.
backwards and pull
.
in optimal
into the tool holder .
forward and
the flat
and turn

Operation

Switching on and off
During operation, you can choose between instan-
taneous and continuous operation.
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
position with the locking switch
Switching off continuous operation:
♦ Press the ON/OFF switch
again.

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Use a soft, dry cloth to clean the housing.
■ Clean the tool holder
♦ Before fitting a tool into the tool holder
grease it lightly.
WARNING!
■ If the replacement of the supply cord is nec-
essary, this has to be done by the manufac-
turer or his agent in order to avoid a safety
hazard.
.
.
and lock it in this
.
and release it
regularly:
,
GB │ IE │
13 ■