Connecting The Power; Connecting To The Steelhead Appliance - Riverbed Steelhead CX Guía Rápida De Instalación

Installing the Steelhead Appliance
If your model requires rails, attach the rails to each side of the appliance. For details, see the Rack

Installation Guide.
Align the screw holes on the flanges with the screw holes on the rack.

Insert and tighten the screws on each side of the appliance.

Note: Do not cover the air vents on models CX255
damage the unit or reduce performance. Models CX255
not need to be mounted to a rack.

3. Connecting the Power

If your model has a master power switch, make sure it is in the off position.

Plug the power cord or cords into the appliance and an AC outlet.

If your model has a master power switch, press in the master power switch (ON).

Press in the system power switch on the front of the appliance.

Caution: In all European electrical environments, you must ground the Green/Yellow tab on the power cord. If you do
not ground the Green/Yellow tab, it can cause electrical shock.

4. Connecting to the Steelhead Appliance

Plug the serial cable into the Console port and a terminal.

Make sure the Console port settings are: 9600, 8 data bits, no parity, 1 stop bit, no flow control.

Start your terminal emulation program (for example, HyperTerminal or Tera Term Pro).

10
,
CX555, CX755, 150, 250, and 550. Doing so restricts air flow and can
,
CX555, CX755, 150, 250, and 550 are desktop models; they do
Installing the Steelhead Appliance
Getting Started Guide