Instructions For Use; How To Fill The Boiler Tank Before Use; How To Start The Appliance - ARIETE multiVapori 2 Compact Instrucciones De Empleo

INSTRUCTIONS FOR USE

How to fill the boiler tank before use

DO NOT CONNECT THE POWER CORD
PLUG TO THE MAINS SOCKET.
Unscrew safety cap and, using funnel,
pour into the tank two measures of water
to the maximum level. Screw safety cap
back on again.
BEFORE UNSCREWING THE TANK
CAP , ALWAYS ENSURE THAT THE
CLEANER IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER
SUPPLY.

How to start the appliance

To turn on the appliance, insert the power cord plug into an electrical socket
and press ON/OFF switch; green indicator and amber indicator will come on.
As soon as amber indicator goes out, the appliance is ready for use. To prevent
steam from being dispensed accidentally, always move the cursor from left to right
( ). To release this lock, move the cursor
from right to left ( ).
In any case, both when first using the clea-
ner and every time it is left unused for a
few minutes, press steam supply button and
discharge any water that has formed in hose
into a container. Then, as soon as the clea-
ner begins supplying steam only, direct the
steam jet towards the floor and press steam
supply button at least two or three times.
Using the Steam Regulation knob, it is possi-
ble to regulate the amount of steam. This means that the appliance can be used
on any type of surface or fabric.
WARNING: For delicate fabrics, we recommend checking the manufacturer's
instructions first.
Reduce the steam pressure when cleaning textiles or delicate surfaces.
19