AFTER USE
When emptying any remaining water from the boiler tank after use, do not for-
get that the water inside the tank remains at a high temperature for a long time.
Therefore, wait at least 1 hour before unscrewing the cap and then empty the
tank with care.
Wind the flexible tube hose around the clea-
ner body and set safety slider back to the
lock position. Replace the gun on the handle
provided.
Or, leave the floor brush and extension tubes
attached to the flexible tube and store it like
this by inserting the hook located on the
back of the brus in the hole provided behind
the cable winder cavity, as shown in figure.
Rewind the power cable into the into the
cable winder cavity.
23