Stroller Assembly - UPPAbaby G-LINK Manual De Instrucciones

STROLLER ASSEMBLY

ATTACHING THE FRONT WHEELS
Attaching Front Wheels: Slide front wheels onto
frame until an audible "click" is heard.
OPENING THE STROLLER
STEP 1: Release fold latch on both sides of the frame
and unfold the stroller.
6
Removing Front Wheels: Push plastic lever on
underside of wheel post and slide wheel off
frame .
STEP 2: Hold release handle while stepping down on
pedal until an audible "click" is heard.
Note: Release handle must be used to open stroller.
NOTE: Make sure the lock "clicks" to indicate that the
frame is fully open.
STROLLER ASSEMBLY
ATTACHING THE CUP HOLDER
STEP 1: The cup holder can be attached on the center
vertical or right vertical frame. Locate small round
plastic notch on chosen vertical frame.
STEP 3: Rotate counter-clockwise and slide down
over plastic notch .
CLEANING
Dishwasher safe, top rack only.
SETTING/RELEASING THE BRAKE
To Set Brake: Press down foot pedal to lock.
To Release Break: Lift up on foot pedal.
STEP 2: Position cup holder hook behind the stroller
frame and above plastic notch.
Removing the Cup Holder: Slide cup holder up,
rotate and move away from stroller frame.
Note: Stroller folds with cup holder attached.
(Remember to remove beverages from cup holder
before folding).
LOCKING/UNLOCKING
FRONT SWIVEL WHEEL
To Lock: Lift up on lever until an audible "click"
is heard . This will fix the wheel in place.
To Unlock: Push down on lever to return to swivel
wheel .
7