Stroller Operation - UPPAbaby G-LINK Manual De Instrucciones

STROLLER ASSEMBLY
ATTACHING THE CANOPY
STEP 1: Clamp canopy attachment STEP 2: Attach Velcro
to frame. Line up openings on panels of seat. Repeat on other side.
canopy attachment to plastic post
located inside the left side of the
stroller frame. Repeat same action
with the center and right openings
on canopy and frame.
FOLDING THE STROLLER
NOTE: Set brakes on stroller prior to folding.
STEP 1: Push button STEP 2: Pull front wheels toward
and rotate
you until fold latch is engaged on
handle up . The frame will begin
to fold. both sides.
8
to side STEP 3: Attach Velcro located on
® ®
back flap of canopy to back of seat
pad.
NOTE: Stroller will stand when
properly latched.

STROLLER OPERATION

ADJUSTING THE SEAT BACK
Reclining Seat Back: Squeeze release lever and recline
seat back to desired position.
ADJUSTING THE HEAD BARRIER
ADJUSTING THE FOOTREST
To Move Up: Lift footrest on each side and slide
tabs to lock in place .
Resetting Seat Back: From any of the reclined
positions, push seat back towards front of stroller.
No need to use release lever.
The head barrier is for infant use. To store out of
the way, wrap head barrier behind top of seat.
To Move Down: Slide tabs to unlock and gently
push footrest down .
9