How To Use - Steren V0110 Manual De Instrucciones

Remember, the last number in Caller ID is the number to be used.
1.- After receiving a phone call, hang the handset up, then press
CANCELAR until the Cancelar indicator LED turns on and off.
2.- Release Cancelar button.
3.- Selected phone number will be stored in blocked phone number
list.
Note:
Remember, you can store up to 25 phone numbers into the memory
(10 digits length).
If you want to remove a phone number from blocked list:
1.- Check the phone number into Caller ID device.
2.- Do not answer the call. Press Restaurar button until Restaurar
LED indicator turns on and off.
3.- Release Restaurar button.
4.- Now desired phone number is unblocked and you can receive
calls from that number.
If you want to block series of numbers (5354-0001, 5354-0002,
5354-0003, etc.), follow these instructions:
1.- After receiving a call, hang the handset up.
2.- Press and hold Cancelar button until Cancelar indicator LED
flashes once, and then flashes twice.
3.- Release Cancelar button.
4.- Similar phone numbers to last incoming call will be stored in
blocked list.
Note:
Series of numbers block allows you to store many phone numbers in
only one memory position in Cancelatel.
20

How to use

How to block a phone number
How to unblock a phone number
How to block series of numbers