How To Use - Steren BAF-700 Manual Del Usuario

INSTALLATION
1.- Plug the cable from the speaker #2 into OUT jack, located in
the fi rst speaker.
2.- Then, plug a 3,5mm / RCA cable to your audio device (MP3,
computer, CD player, etc.). If you use a RCA cable, remember to
match the colors from the cables with the jacks, in both devices.
Usually, the 3,5mm cable should be connected to earphones
output jack of the portable device.

HOW TO USE

Follow these simple steps to use the speakers:
1.- Turn the speakers on, press Power button to do it.
2.- Set the volume level to the minimum, later you can set it in
accord to your necessities.
3.- Turn the audio device on (MP3 player, computer, CD player,
etc.)
4.- Playback a song and raise the volume level in the speakers.
5.- You will listen to the music in the speakers.
6.- To turn the speakers off, just press Power button once.
SPECIFICATIONS
Input:
Impedance:
Output:
Output response:
Treble:
Bass:
Separation:
SNR:
Dimensions:
Weight:
Power adapter
Input:
Output:
Product design and specifi cations are subject to change Product design and specifi cations are subject to change
without previous notice without previous notice
12V
4ohms
25+25W RMS
300W PMPO
0Hz – 18kHz
10dB +2dB
10dB +2dB
48dB
74dB
8x5,5x5x5in
R: 2,15lb
127V~
12V
ENGLISH-4
L: 2,11lb
60Hz
1000mA
15W