Setting Alarm - CICLOSPORT CICLOPULS CP13is El Manual Del Propietario

4.2 setting alarm

Press and hold the Set button for 3
seconds when the display shows the
time and date.
"AL" will appear on the display, as
well as the time set for the alarm.
If the Mode button is pressed and
held for 3 seconds the hour will flash
on the display.
Press the Set button to change the value displayed and
store using the Mode button.
The minutes are then set.
Press the Set button to change the value displayed and
store using the Mode button.
Press the Set button, whilst in Alarm
mode, to switch the alarm on or off.
The alarm symbol will appear on the
display.
Store using the Mode button.
27